Version History

Version 1.17.2 (2024-03-19)

• Enhancement
  • [AAX-Native] UI scaling feature is now enabled on Pro Tools.
• Improvements
  • [Windows] Speed up installation.
  • [Cyclic Panner, Invisible Limiter G2, Invisible Limiter G3, Stereo Imager D, Tau Compressor Plus, Triple Fader, tranQuilizr, Wave Shredder] Prevent potential delay of meter/graph display on some exotic hosts.
  • [Stereo Imager D] Suppress meaningless error log under more than 800kHz (unsupported) sampling rate.
  • [All Plugins] Reduce wait time during host quit.
• Bug Fixes
  • [Invisible Limiter G3] Soft Limiter section extremely sporadically stops working – Fixed.
  • [Invisible Limiter, Invisible Limiter G3, Kujaku, DeSibilizer, Track Symbiosis, Nu Compressor] On some hosts, which suspend its audio engine during playback stop, plugins could output tail of previously processed signals – Fixed.
  • [Invisible Limiter G2] Plugin do not memorize user’s latest selection of Easy/Advanced Mode settings. – Fixed.
  • [DeSibilizer, Track Symbiosis] Plugins potentially freeze on GUI operation under almost 100% CPU load. There is no reproduction report in the real world. – Fixed.
• Changes
  • [Triple Fader] Limit gain change rate between +/- 0.1dB per sample.

Version 1.17.1 (2023-09-06)

• Improvements
  • [All Plugins] Mouse wheel and swipe operations now can be disabled. This reduces accidental knob operations caused by Magic Mouse or two-finger swipe.
• Bugfixes
  • [Kujaku] As to undo, redo, preset load and snapshot load operations, if changes contain only curve points edit, Kujaku doesn’t follow the changes until any subsequent operation. – Fixed.
• Changes
  • [macOS, All Plugins] macOS 10.14 Mojave now reached end of our support.

Version 1.17.0 (2023-08-07)

• New Plugin
  • Kujaku
• Improvements
  • [All Plugins] Snapshot load from saved preset file is now undoable.

Version 1.16.2 (2023-04-17)

• New Features
  • [Wave Shredder] Add low-pass filter.
  • [Wave Shredder] Add waveform display.
• Improvements
  • [Wave Shredder] Update GUI with Hi-DPI images.
• Bugfixes
  • [All Plugins] Unexpected undo trigger after pressing redo button. This bug was introduced in version 1.16.1. – fixed
  • [All Plugins] Remove undo history erasure step during exporting. This behavior was introduced in version 1.15.6 as symptomatic fix for another problem. Root cause has been fixed in current version, thus this symptomatic fix became unnecessary.

Version 1.16.1 (2023-03-22)

• Improvements
  • [Stereo Imager D] Update GUI with Hi-DPI images.
  • [All Plugins] Plugins now send non-parameter change notification to host application after following operations: preset load, parameter reset, undo, redo and snapshot load.
  • [Nu Compressor] Plugin now sends non-parameter change notification to host application after mode selection.
• Bugfixes
  • [Cyclic Panner, Invisible Limiter, Invisible Limiter G2, Invisible Limiter G3, Track Symbiosis, Wave Shredder] Parameter change notification was not sent to host application after following operations of drop-down list: select next/previous items by small triangle button, select next/previous items by mouse wheel. – fixed.
  • [Sakura Dither] Parameter change notification was not sent to host application after button operations. – fixed.

Version 1.16.0 (2023-03-12)

• New Plug-in
  • Track Symbiosis
• Improvements
  • [All Plugins] Add plugin protection against some host which provides abnormal waveform data.

Version 1.15.6 (2023-01-25)

• New Features and Enhancements
  • [macOS, AAX] Apple Silicon Mac support. AAX-Native plugins now contain both Intel and ARM native binary.
• Changes
  • [All Plugins] Reset operation by parameter reset button in header has been excluded from automation recording.

Version 1.15.5 (2022-11-26)

• Bugfixes

  • [CLAP] Plugin format was displayed as “Undefined” in CLAP plugins. – fixed
  • [Nu Compressor, Tau Compressor Plus] Slow VU meter issue in DaVinci Resolve Fairlight. – fixed

• Changes

  • [All Plugins] Add support for online list of revoked licenses.
  • [All Plugins] Update aesthetic design of menu bar and status bar.
  • [Invisible Limiter G2] Update outdated tooltip text.

Version 1.15.4 (2022-09-18)

• Improvements
  • [Nu Compressor] Supports wider range of side-chain bus channel configuraion, including Pro Tools’ mono key inputs.
  • [All Plugins] Expand window scaling range to 50%-200%.
• Bugfixes
  • [Nu Compressor] Plugin crashes in Final Cut Pro X. – fixed
• Changes
  • [Invisible Limiter G2] Remove gain change operation by MIDI note-on.

Version 1.15.3 (2022-09-09)

• New Features and Enhancements
  • [All Plugins] CLAP plugin format is now supported.
• Changes
  • [Windows] Migrate installation technology from MSI+BatchFile+IExpress to MSI+NSIS.
  • [macOS] Drop support of macOS 10.12 Sierra and macOS 10.13 High Sierra.

Version 1.15.2 (2022-08-26)

• Improvements
  • [tranQuilizr G2] Reduce CPU load of Algorithm IV by 56% (typical, Intel) / 10% (typical, Apple Silicon).

Version 1.15.1 (2022-08-06)

• Bugfixes
  • [Nu Compressor] Plugin inserts intermittent silence to output signal. This bug was introduced in version 1.15.0. – Fixed
  • [Invisible Limiter G3] Plugin sometimes reports wrong plugin latency longer than its design by 292 samples. This bug was introduced in version 1.15.0. – Fixed
  • [Invisible Limiter G3] In WaveLab’s rendering result, plugin applies unexpected fade-in to the head of output signal. This bug was introduced in version 1.15.0. – Fixed
• Improvements
  • [Invisible Limiter G3] Add Default factory preset.

Version 1.15.0 (2022-08-04)

• New Plug-in
  • Invisible Limiter G3
• Bugfixes
  • [All Plugins] Factory presets were disappeared. This bug was introduced in version 1.14.2. – Fixed.
• Improvements
  • [All Plugins] Support unbounded drag operation on knobs.
  • [Invisible Limiter G2] Reduce CPU load by 37% (typical) in Modern III, IV, V modes.
  • [Nu Compressor] Reduce CPU load by 4% (typical).
  • [tranQuilizr G2] Reduce CPU load by 46% (typical).

Version 1.14.2 (2022-07-08)

• New Features and Enhancements
  • [tranQuilizr G2] Add Algorithm IV.
• Bugfixes
  • [Triple Fader] When LUFS-S is selected, LUFS-M meter value is displayed. This bug was introduced in version 1.14.0. – Fixed.
• Improvements
  • [All Plugins] Hide factory preset folder if each plugin does not have factory presets.
  • [All Plugins] Sort user presets alphabetically.

Version 1.14.1 (2022-04-07)

• Bugfixes
  • [DeSibilizer] OUT component was added to ESS output, when monitor is set to ESS and makeup is not set to 0dB. This bug was introduced in version 1.13.0. - fixed
  • [Sakura Dither] Bit depth selection sometimes does not get applied. This bug was introduced in version 1.14.0. - fixed
  • [Triple Fader] Placeholder text was displayed on faders. This bug was introduced in version 1.14.0. - fixed

Version 1.14.0 (2022-03-31)

• New Plugin

  • Triple Fader

• Improvements

  • [Invisible Limiter] Reduce CPU load up to 40%, except for Suppress mode.
  • [All Plugins] User preset load operation is now included undo history.
  • [All Plugins] Reduce GUI load time
  • [tranQuilizr, tranQuilizr G2] Improve GUI behavior consistensy. EQ point always gets enabled when user start dragging.
  • [DeSibilizer] High resolution image.
  • [tranQuilizr] Support multichannel I/O metering.

• Bugfixes

  • [tranQuilizr G2] In WaveLab, some knobs were left inoperable when user operated plugin’s GUI before the first playback. – Fixed.

• Changes

  • [Invisible Limiter G2] Easy Mode and meter settings are now shared among plugin instances.

Version 1.13.3 (2022-01-27)

• New Features and Enhancements
  • [Invisible Limiter G2] Modern V mode is added.
  • [tranQuilizr G2] Algorithm III is added.

Version 1.13.2 (2022-01-07)

• Bugfixes
  • [macOS 10.12-10.13] Plugin GUI does not appear. – Fixed. This bug was introduced in version 1.13.0.
  • [All Plugins] Peak meter in header pane blinks under very large block size. – Fixed.
• Changes
  • [All Plugins] Cancel the “pop-up menus respect system color” feature introduced in version 1.13.0, because there were no reliable method to obtain system menu color among supported macOS versions.

Version 1.13.1 (2021-12-23)

• Bugfixes
  • [tranQuilizr G2, macOS] GUI is not visible or plugin crashes. This bug was introduced in version 1.13.0. – fixed.

Version 1.13.0 (2021-12-22)

• New Plugin:
  • DeSibilizer
• New Features and Enhancements:
  • [All Plugins] Integrated user/factory preset management.
• Improvements
  • [All Plugins] Popup menus now respect system color.

Version 1.12.2 (2021-11-28)

• Bugfixes
  • [macOS, Invisible Limiter G2, VST3] On Cubase 11 and macOS Mojave, plugin crushes after exporting if plugin window of Invisible Limiter G2 (VST3) is shown. This bug was introduced in plugins version 1.12.1. – fixed.

Version 1.12.1 (2021-11-12)

• New Features and Enhancements
  • [Tau Compressor Plus] Plugin now can be bypassed by clicking VU meter area.
• Improvements
  • [Tau Compressor Plus] Change operation of “Mode” parameter from dragging to clicking.
  • [tranQuilizr] Add a workaround to fix unexpected move of EQ points while user is dragging it in Cubase 10.0.x or earlier.
  • [All Plugins] During user operation, plugins now ignore parameter value update from hosts. This change mitigates random parameter change which appears in some hosts.

Version 1.12.0 (2021-09-21)

• New Plug-in
  • Tau Compressor Plus
• Improvements
  • [VST2, VST3, Audio Unit] Revise scaling method and add a workaround to some hosts’ frame resize issue.
  • [Cyclic Panner, Invisible Limiter, Invisible Limiter G2, Nu Compressor, tranQuilizr] Reduce UI loading time of the first instance in project.
• Bugfixes
  • [Cyclic Panner, Invisible Limiter, Invisible Limiter G2, Sakura Dither, tranQuilizr] Some enumerate parameters were set to unexpected value when trying to reset them using reset button in menu bar – fixed. Affected parameters are these nine:
    • Cyclic Panner / Speed
    • Invisible Limiter / Shape, Overshoot
    • Invisible Limiter G2 / Quality, Mode, Dither
    • Sakura Dither / Depth
    • tranQuilizr / Monitor, Channel
  • [tranQuilizr] Shelving band was displayed as peaking in graph area – fixed. This bug is about only curve display, thus it does not affect signal processing at all. This bug was introduced in version 1.11.5.

Version 1.11.8 (2021-09-08)

• Improvement
  • [Nu Compressor] Enlarge GUI size by ~10%.
• Bugfix
  • [Sakura Dither, VST3] In WaveLab, DDP export takes extremely long time where all of following conditions are met: Sakura Dither is inserted into final effects / dithering section; Resampler plugin is inserted; Sampling frequency of audio montage is not 44100Hz. This bug is a side effect of the workaround for Digital Performer’s plugin scanner, which is introduced in version 1.11.6. – fixed.
• Change
  • [All Plugins] Divide an unified plugin installer into per-plugin-format installers.

Version 1.11.7 (2021-08-08)

• New Features and Enhancements
  • [Nu Compressor] Quasi peak program meter of reduction amount has been added. Integration time is 3 msec.
  • [Nu Compressor] “Color” lamp has been added. This indicates the amount of processing under nonlinear part of internal tone processor.

Version 1.11.6 (2021-07-13)

• Improvements
  • [Invisible Limiter, Nu Compressor, Stereo Imager D, tranQuilizr] Meter update rate gets more stable in non-60fps display.
  • [VST2] Add a workaround against the behavior of Digital Performer’s plugins scanner.
• Bug Fixes
  • [tranQuilizr] Analyzer update frequency was affected by user operation. This bug was introduced in v1.11.5. – fixed.
  • [Stereo Imager D] Unexpected phase meter display under very high sampling rate (192kHz or upper). – fixed.
  • [VST2, VST3] Automation lane was unexpectedly deactivated during playback in Ableton Live. This bug was introduced in v1.11.3. – fixed.

Version 1.11.5 (2021-06-12)

• New Features and Enhancements
  • [All Plugins] Plugin settings import/export feature.
• Bug fixes
  • [Invisible Limiter G2, Nu Compressor] When host reports between 1Hz (inclusive) and 44100Hz (exclusive) sampling rate, plugins may leave self-test error log. – fixed.
  • [tranQuilizr, Mac] Meter colors are brighter than design. – fixed.
  • [Cyclic Panner] Text input of panpot parameter was not properly interpreted. This bug was introduced in version 1.11.3. – fixed.
• Changes
  • [All Plugins] Toggle buttons and dropdown buttons are now triggered by mouse-down (previously mouse-up).
  • [tranQuilizr] Analyzer settings are now shared by all instances of tranQuilizr.

Version 1.11.4 (2021-03-15)

• New Features and Enhancements
  • [Invisible Limiter G2] Added Modern IV mode.
  • [tranQuilizr G2] Added Algorithm parameter. Algorithm=II is newly introduced algorithm in this version.
  • [All Plugins] Added AVX2-enabled installer variant. AVX2 plugins will reduce CPU load by 0-45%, depending on kind of plugins.

Version 1.11.3 (2021-02-05)

• Improvements
  • [Invisible Limiter G2] Reduce CPU load by approx. 4%.
  • [All Plugins] Officially supports up to 384kHz sampling rate.
• Bug Fixes
  • [Nu Compressor] Potential double needle display under very large I/O buffer size. – fixed
  • [Invisible Limiter, Invisible Limiter G2, Wave Shredder, tranQuilizr, Cyclic Panner, Stereo Imager D] Mouse cursor did not change to pointing-hand cursor when user points toggle buttons. Introduced in version 1.11.0. – fixed.
• Changes
  • [All Plugins] Migrate from PDF manual to online manual.
  • [tranQuilizr] Change default band width of spectrum analyzer to 1/12 octave.
  • [Invisible Limiter G2] Migrate meter-related settings from instance settings to user preference.

Version 1.11.2 (2020-11-17)

• New Features and Enhancements
  • [macOS, VST2, VST3, Audio Unit] Apple Silicon Mac support. All plugins contain both Intel and ARM native codes.
• Bug Fixes
  • [Nu Compressor] Selected program did not get loaded immediately before the first playback in Logic Pro X and WaveLab. – fixed
  • [Stereo Imager D] Potential blank display of phase meter in Cubase and ProTools, when user inserts a new instance during playback. – fixed
• Changes
  • [All Plugins] Remove addressing width display from plugin information dialog. All A.O.M. plugins are already 64bit.
  • [All Plugins] Add current instruction set architecture display to plugin information dialog.

Version 1.11.1 (2020-09-30)

• Improvements
  • [All Plugins] Plugins now keep parameter values unchanged when non-numeric text is entered to value box.
  • [Nu Compressor] Integrate block diagrams in manual.
  • [Nu Compressor] Add monitor level adjustment when internal side-chain is selected and side-chain monitoring is enabled.
• Bug fixes
  • [Nu Compressor] Correct plugin latency samples reported to host.
  • [All Plugins] Value box keeps entered text when invalid or out-of-range value is entered to value box. – Fixed.

Version 1.11.0 (2020-09-20)

• New Plugin
  • Nu Compressor
• Improvements
  • [Cyclic Panner, Invisible Limiter, Invisible Limiter G2, Sakura Dither, Stereo Imager D, tranQuilizr, Wave Shredder] Reduce GUI loading time. This improvement reduces Logic’s overload warning on GUI open.
  • [All Plugins] Improve robustness when host feeds invalid waveform data.
  • [All Plugins] Hide mouse cursor during drag operation.
• Bug Fixes
  • [tranQuilizr G2] Fix silence bug appearing when a band meets all of following conditions: (1) band is peaking type. (2) band is in solo state. (3) band is B-mode. (4) band frequency is higher than around 2.5kHz (differ depending on quality setting).
  • [All Plugins] Fix potential bug that multiple-choice pararmeters’ update may not get notified to host. However, there is no reproduction report in real environment.

Version 1.10.4 (2020-07-25)

• Improvements
  • [All Plugins] In text field, comma is now parsed as a decimal point in addition to period. This behavior is useful to enter numeric values using keypad in some locales.
  • [Cyclic Panner, Invisible Limiter G2, Stereo Imager D, tranQuilizr, tranQuilizr G2] Improve meter update fluency under large processing block size.
• Bug fixes
  • [All Plugins, Mac] Color gap around knobs and buttons in Pro Tools – fixed.
• Changes
  • [Invisible Limiter G2] Change default quality setting to 4.

Version 1.10.3 (2020-04-19)

• New Features
  • [All Plugins] Localized tooltip. (Japanese/English)
  • [Invisible Limiter G2] Meter panel visibility option.
  • [tranQuilizr G2] Band palette beside equalizer points.
  • [tranQuilizr G2] EQ curve display in Pro Tools’ mix window.
  • [tranQuilizr G2] Horizontal range reset button.
  • [tranQuilizr G2] Drag and wheel configuration dialog.
• Improvements
  • [macOS, Cyclic Panner, Stereo Imager D, tranQuilizr G2, Invisible Limiter G2] Reduce meter drawing load (negligible)
  • [tranQuilizr G2] Improve display in Windows HiDPI and macOS Retina environments.
• Changes
  • [All Plugins] New design of common menu bar.
  • [All Plugins] New design of dialog windows.
  • [All Plugins] Status bar has been removed.
  • [All Plugins] Scaling settings is now saved per plugin.
  • [tranQuilizr G2] New design of equalizer curves.

Version 1.10.2 (2020-03-01)

• New Features and Enhancements
  • [Invisible Limiter, macOS] CPU load is reduced to 60% of previous version.
  • [Invisible Limiter G2, macOS] CPU load is reduced to 55% of previous version.
  • [Sakura Dither, macOS] CPU load is reduced to 75% of previous version.
  • [tranQuilizr, macOS] CPU load is reduced to 95% of previous version.
  • [tranQuilizr G2, macOS] CPU load is reduced to 35% of previous version.
• Bug Fixes
  • [tranQuilizr G2] Direction of wheel operation was inverted. – fixed

Version 1.10.1 (2020-01-12)

• New Features and Enhancements
  • [All Plugins] Improve graphics performance when plugin window is scaled to 125% or 150%.
  • [All Plugins, Windows] Improve graphics performance under HiDPI enabled hosts.
  • [tranQuilizr G2] Add mouse wheel configuration.
  • [tranQuilizr G2, Mac] Support Command modifier in equalizer point operation.
• Bug Fixes
  • [tranQuilizr G2] Signal discontinuity when user enables band solo as the first operation of the band – fixed.
  • [tranQuilizr G2] Band color did not follow change of band type – fixed.
• Changes
  • [All Plugins, Mac] Drop support for OSX 10.9 and 10.10.
  • [All Plugins, Mac] Drop support for Component Manager-based Audio Unit plugins (AUv1).
  • [All Plugins, Mac] Migrate graphics backend from OpenGL to CoreGraphics.

Version 1.10.0 (2019-11-04)

• Add macOS notarized installer.

Version 1.10.0 (2019-07-31)

• New Plugin
  • tranQuilizr G2
• Bug Fixes and workarounds
  • [All Plugins, Windows, VST3] Add a workaround to avoid problem that Samplitude fails to load project after plugin’s parameter count gets decreased.
  • [Invisible Limiter G2] K-weighting filter was unintentionally applied to main signal line when K-weighting setting is enabled. This bug was introduced in version 1.9.5. – fixed.

Version 1.9.6 (2019-07-16)

• New Feature and Enhancements
  • [Invisible Limiter G2] Add “Modern III” limit mode.
  • [Mac] Add GUI scaling feature.
• Bug Fixes
  • [All Plugins, Audio Unit] Plugins do not update its values after loading user-saved preset – fixed.
  • [All Plugins, VST3] Long window open time in Samplitude – fixed.
  • [All Plugins] Left/Right triangle buttons of dropdown button stay after menu item selection – fixed.

Version 1.9.5 (2019-03-26)

• New Features and Enhancements

  • [All Plugins] Introduce parameter snapshot feature. This supersedes A/B comparison feature.
  • [All Plugins] Support hierarchy in factory presets.
  • [All Plugins] Support undoing parameter reset.
  • [All Plugins] Support wheel increment/decrement in drop-down list.
  • [All Plugins] Add support for evaluation license.
  • [All Plugins, Windows] Introduce plugin zoom feature.
  • [Invisible Limiter / Invisible Limiter G2] Show internal sampling rate in quality parameter.
  • [Invisible Limiter G2] Make CPU load slightly lower.
  • [tranQuilizr] Add unit to bandwidth value.

• Bug Fixes

  • [All Plugins] Eliminate redundant memory (re)allocation. (potential performance improvement)
  • [All Plugins] Fix a bug that license status (key icon) did not become authorized state around 1 second after GUI open in some hosts.
  • [All Plugins] Fix a bug that parameter link in Cubase did not work after double-clicking knobs.
  • [All Plugins, Mac] Fix laggy display during knob operation. This fix also mitigates host’s laggy display caused by plugins.
  • [Cyclic Panner] Eliminate inefficient memory allocation. (potential performance improvement)
  • [Invisible Limiter G2] Mitigate pop noise related to quality change.
  • [tranQuilizr] Fix a bug that tranQuilizr records empty undo history after touching equalizer points.
  • [tranQuilizr] Fix a potential bug of duplicated begin/end notification of mouse gesture.
  • [tranQuilizr] Mitigate pop noise related to filter’s slope change.

• Changes

  • [All Plugins] Disable in-plugin undo/redo feature in some hosts (Studio One, Ableton Live, Logic Pro). These hosts have native undo/redo feature and both have interfered each other.
  • [All Plugins] Increase number of digits when editing.
  • [All Plugins] Remove license file open dialog from in-plugin license installation dialog. Now this feature supports only drag-and-drop of license file.
  • [All Plugins] Switch from modal dialog to full-window dialog. This avoids potential bug caused by window modality and order.
  • [Cyclic Panner] Change panpot value representation like “C” or “L 50”.
  • [Invisible Limiter G2] Remove preset-load lock feature (tablet icon). Now plugin always accepts parameter load by user operation. Factory presets do not overwrite current settings of gain, wet mix, unity gain monitoring, bypass parameters.

Version 1.9.4 (2018-09-09)

• Bug Fixes
  • [tranQuilizr, Invisible Limiter G2] Bugfix: possible high CPU load and large memory consumption when more than 30 instances in a same project. – fixed
  • [tranQuilizr] Bugfix: very short (1-2ms) pop noise infrequently appears on the head of rendered waveform. – fixed
  • [Windows, VST3] Bugfix: black window when one tries to open already-opened plugin window in Samplitude. – fixed. We have adjusted our GUI to follow up a Samplitude’s problematic behavior; Samplitude starts to reinitialize plugin’s GUI but it does not call VST3’s atatched() callback when plugin window is already opened. As the result, plugin’s internal GUI component is left unattached to window handle, thus black window appears.
  • [Mac Installer] Possible failure of installation during downgrading overwrite installation. – fixed
• Changes
  • [All Plugins] Remove tooltip from status bar and add manual-open button. This reduces flickering impression of GUI caused by the tooltip.
  • [Mac OS X] Exclude Mac 32-bit plugins.

Version 1.9.3 (2018-06-24)

• Bug Fixes
  • [All plugins] Plugin silently fails to install license during license installation from plugin window. This bug appears only if there is no existing license, e.g. clean-installed computer or new A.O.M. user. – fixed

Version 1.9.2 (2018-06-18)

• New Features and Enhancements
  • [Sakura Dither] Support 64f detection.
  • [All plugins] Show license end date in status bar.
  • [All plugins] Support GUI dimming while bypass.
  • [Invisible Limiter G2] Interpret non-negative value as negative value in CEILING parameter.
  • [Invisible Limiter] Interpret non-negative value as negative value in LIMIT LEVEL parameter.
  • [Wave Shredder] Interpret non-negative value as negative value in GATE and CHOP parameters.
  • [All plugins] Show more system information in about dialog.
  • [All plugins] Include diagnostic log lines into system stats.
  • [All plugins] Add a new feature which enables license installation from plugin GUI.
  • [Invisible Limiter G2] Improve performance by around 7%.
  • [tranQuilizr] Improve draw performance of equalization curve.
• Bug Fixes
  • [Invisible Limiter G2] Bugfix: BIAS button did not work against expectations.
  • [All plugins] Fix value display error of percentage-style parameters. Sometimes 1-smaller value was displayed mistakenly (foe example, “89%” was displayed when actual value was 90%.)
• Changes
  • [tranQuilizr] Change gain knob’s wheel sensitivity to 1dB / 0.1dB.
  • [tranQuilizr] Change targeted channel processing behavior; in solo mode, tranQuilizr will mute untargeted channels. For example, R channel is muted where L channel is selected. This behavior is enabled only under stereo I/O configuration.
  • [VST3 plugins] Add workaround code for the issue that FL Studio fails to setup dynamic channel configuration.

Version 1.9.1 (2018-02-02)

• Bug Fixes
  • [All Plugins] Plugins fail reading licenses except for the earliest installed license. This bug introduced in version 1.9.0. – fixed

Version 1.9.0 (2018-02-01)

• New Features and Enhancements
  • New plugin: Sakura Dither
• Bug Fixes
  • [Invisible Limiter G2] In WaveLab bitmeter, ‘inter’ and ‘below’ indicators were unexpectedly lighting up, when dither feature is active. – fixed
• Changes
  • [All plugins] Remove obsoleted denormal number treatment code.
  • [All plugins] Drop support for OSX 10.7 Lion and OSX 10.8 Mountain Lion

Version 1.8.2 (2017-12-28)

• New features and enhancements
  • [All plugins] Add status bar and make tooltip displayed on status bar.
  • [All plugins] Full-window ‘demo mode’ display.
  • [Invisible Limiter G2] Add new factory preset.
• Bug fixes
  • [Invisible Limiter / Invisible Limiter G2] Potential memory leak bug in macOS Sierra. First reported on middle November. – fixed
  • [Invisible Limiter] Potential mute bug, when DAW supplies 0 channel audio block. – fixed
  • [Invisible Limiter G2] Wrong ceiling point in K-xx meter modes. – fixed
  • [Invisible Limiter G2] Lower bit of bit meter in WaveLab flaps after dither processing. – fixed
  • [Invisible Limiter G2] Release amount was held beyond every playback under extremely long release time setting. – fixed
  • [tranQuilizr] Total curve was calculated from all bands even under non-‘all’ curve display modes. – fixed
  • [tranQuilizr] Potential crash on plugin GUI startup. – fixed
  • [tranQuilizr] Potential tiny (several kilobytes) memory leak bug. – fixed
  • [Wave Shredder] Potential pop noise on first playback. – fixed
  • [Windows] Wrong fallback condition of registry-stored common plugin settings. – fixed.
• Changes
  • [Invisible Limiter G2] Modern II is now startup mode.

Version 1.8.1 (2017-07-06)

• New features and enhancements
  • [Invisible Limiter G2] Add “Modern II” a new limiting mode.
  • [Invisible Limiter G2] Support up to quality 10.
  • [Invisible Limiter G2] Reduce CPU load by 30-40%.
  • [Invisible Limiter G2, VST3/AU/AAX] Support up to 12 channels symmetric I/O.
  • [Invisible Limiter G2] Support gain button control by MIDI note-on.
  • [Windows Installer] Installer now includes required external library (Visual C++ Redistributable). Users no longer need to install the library separately.
  • [All plugins] Reduce potential CPU spike caused by internal inter-thread lock.
  • [VST3] Support soft bypass button, which is normally placed at out of plugin’s window.
  • [tranQuilizr] Simplify analyzer curve.
  • [All plugins] Add “Copy System Stats to Clipboard” menu. It’s helpful for troubleshooting.
• Bug fixes
  • [tranQuilizr, AU] Compare button did not get active after touching equalizer/filter points in Logic Pro X.
  • [Windows Installer] Some unnecessary file was left after uninstall.
  • [Windows Installer] Installer sometimes failed to recognize required external library.
  • [VST2/VST3, Windows] Shape of mouse cursor was not changed properly in Studio One 3.
  • [VST3, OSX] Blank window in WaveLab 9.
  • [Invisible Limiter G2, OSX] GUI placement bug in WaveLab 8.5 or earlier.
  • [Invisible Limiter G2, VST3, Windows] GUI placement bug in Studio One 2.
  • [VST3, Windows] Saved parameters did not get loaded in Reaper.
  • [VST2, Windows] Windows size was not adjusted correctly in Cubase 7.
  • [VST3] Fix a channel configuration report bug in some hosts.
• Changes
  • [All Plugins] Internal threshold of on/off type parameter is now set to 0.5.

Version 1.8.0 (2016-05-20)

• New features and enhancements
  • New plugin: Invisible Limiter G2
  • New plugin format: VST3
  • [All Plugins] Add next and previous buttons to drop-down list.
  • [All Plugins] Knob value can be reset to default by double-clicking.
• Bug fixes
  • [tranQuilizr] Fix bug that analyzer display gets shifted under non-44100Hz sampling rate.
  • [All Plugins] Knob’s text field did not show correct value when dragging to maximum or minimum value.

Version 1.7.5 (2016-02-10)

• New features and enhancements
  • [Mac OS X] Enable precise step knob operation using Shift+Wheel.
  • [tranQuilizr] Show guide arrow or icon when equalizer knot is in frequency-/gain-/bandwidth-only operation mode.
• Bug fixes
  • [Mac OS X] Fix bug that Cubase crashes when it attempts to show window after plugin scanning. This bug appears only in combination of OSX 10.9 + Cubase 8 + A.O.M. Plugins v1.7.4.
  • [VST] Fix mistake in version number in Cubase’s Plugin Manager, was displayed as 0.1.7.4.
  • [AudioUnit] Fix bug that plugin fails to restore settings from previously saved project.
  • [tranQuilizr] Fix bug that touch-and-enable behavior of equalizer knot didn’t get reset when reset button was pressed.
  • [tranQuilizr] Fix bug that monitor channel settings was not saved correctly.

Version 1.7.4 (2016-01-31)

• New features and enhancements
  • [All Plugins] Add factory preset, reset button, undo/redo, tooltips and common plugin menu.
  • [All Plugins] Suppress pop noise when toggling bypass.
  • [All Plugins] Windows 10 and OS X 10.11 are supported.
  • [tranQuilizr] Add “Ear-Only” mode.
  • [tranQuilizr] Add new analyzer features: display mode (instant / peak hold / accumulate), octave band (1 oct. to 1/12 oct.), fall-down speed, tilt slope, display range, display offset.
  • [Wave Shredder] Add gain knob.
• Bug fixes
  • [All plugins] Fix negative number display of remaining days of license.
  • [All Plugins] Fix a bug that plugin UI stops updating after touching X-Y pad in Live.
  • [All Plugins] Some knobs/buttons are now compatible with real-time automation writing.
  • [All Plugins] Fix memory leak reported in Audio Unit Validation Tool under OS X 10.7 and 10.8. It was a tiny amount of memory (less than 1KB) and was virtually harmless.
  • [AAX] Fix a bug that plugins does not appear in AudioSuite plugin list.
  • [Invisible Limiter, VST] Fix a crush bug when opening a project including Invisible Limiter instance with “LATENCY=LOW” setting, in FL Studio.
  • [Stereo Imager D] Fix a bug that input signal above Fs/4 was not processed. Since this fix breaks backward compatibility of processing algorithm, Stereo Imager D uses old algorithm by default. Turn off “Backward Compatibility” item in plugin menu to enable new algorithm.
  • [tranQuilizr] Fix zero (flat) display of equalizing curve before first playback in WaveLab or other wave editor-style hosts.
  • [tranQuilizr] Fix glitch of equalizing curve while user operates equalizer knot.
  • [tranQuilizr, Mac OS X] Improve response in OS X 10.11.
• Changes
  • [All Plugins] Installers get organized into Windows 64-bit, Windows 32-bit and Mac OS X.
  • [All Plugins] Pictogram for license status display.
  • [All Plugins] Use white noise instead of silence in demo mode.
  • [AAX] Concrete parameter value is shown beside automation knot, instead of normalized value.
  • [tranQuilizr] Make hidden equalizer knots inoperable to avoid accidental touch of hidden band.
  • [tranQuilizr] Total equalizing curve reflects AGC setting.
  • [tranQuilizr, AAX, Windows] Add Ctrl+Shift+LeftDrag gesture for bandwidth operation in Pro Tools.

Version 1.7.3 (2015-05-03)

• New features and enhancements
  • [All Plugins] Supports “Compare” button in hosts.
  • [All Plugins] Supports control automation in Ableton Live.
  • [All Plugins] Supports dynamic plug-in latency change.
  • [All Plugins] Removes GUI update rate throttling. Plugin GUI update rate now depends on host’s callback rate.
  • [All Plugins] Implements lightweight denormal number handling. This change prevents CPU spike caused by denormal numbers as same as previous implementation, but consumes fewer CPU cycles. SSE3 is now required.
  • [OSX Plugins] Introduces package installer.
  • [Invisible Limiter AAX] Enables “LATENCY” parameter.
  • [Invisible Limiter, tranQuilizr, Wave Shredder] Supports surround configuration up to 8in/8out. (EXPERIMENTAL)
  • [tranQuilizr] Improves performance slightly.
  • [Cyclic Panner] Supports 1in/2out configuration.
• Bug fixes
  • [All Plugins] Fixes wrong plugin name display in foobar2000 VST extension.
  • [All Plugins] Fixes authorization failure bug caused by some broken license file.
  • [AAX] Fixes keyboard input blackhole bug.
  • [Invisible Limiter VST] Fix a bug of dynamic plug-in latency change, originally reported in Ableton Live and Bitwig Studio.
  • [tranQuilizr] Fixes GUI bug in equalization curve display on reopening plugin window.
  • [tranQuilizr] Fixes potential crash bug in Cubase.

Version 1.7.2 (2014-03-31)

• New features and enhancements
  • [Invisible Limiter] Shipped with a new skin, designed by Ryo Asakura <http://www.seventh.graphics/>_.
  • [Invisible Limiter] Adds “Suppress” mode in OVERSHOOT parameter. This mode adds small amount of reduction to signal instead of clipping in “Clip” mode. This mode brings analog-like sound, such as more gentle mid-high and fatter mid-low compared with same setup in Clip mode.
  • [Invisible Limiter] Sets knob’s default value to correct one. Users now can revert knob values to default by Ctrl-clicking.
  • [tranQuilizr] Adds over-0dB indicator.
  • [tranQuilizr] Performance improvement for 10-20%. This version is now 2.6 times faster compared with the initial release.
  • [All Plugins] Add prior notice of license expiration. Notification will be displayed if days to expire is 30 or less.
  • [All plugins for AAX-Native and AU] Employs new crash guards. Plugins handle internal errors more gently and record it to log file for problem resolution.
• Bug fixes
  • [tranQuilizr for AAX-Native] Enables Alt+Drag operations in ProTools.
  • [tranQuilizr for VST, Windows] Fixes equalizing curve was incorrectly displayed when a project is reopened in SONAR.
  • [tranQuilizr] Fixes crashing bug when any band-solo is enabled.

Version 1.7.1 (2014-02-03)

• Bug fixes
  • [Invisible Limiter for AAX Native] Prevents crash on mono or dual-mono tracks.
  • [All plugins for Audio Unit] Prevents crash when closing plugin window on DSP Quattro.
  • [tranQuilizr] Fixed performance regression when using analyzers.
  • [tranQuilizr] Fixed a bug that display channel button didn’t follow current display channel status.

Version 1.7.0 (2013-11-23)

• New plug-in
  • Cyclic Panner
• Bug fixes
  • [tranQulizr / AAX] Equalizer/filter bands operated only in graphical area were turned off after reloading project.
  • [tranQuilizr] Fixed minimum and maximum value display around output gain knob.
  • [Stereo Image D / AU, AAX] Plugin possibly crashes during when user attempts to close plugin window.

Version 1.6.1 (2013-10-06)

• New features and enhancements
  • [Invisible Limiter] Long-term maximum reduction amount display
  • [tranQuilizr] Increase contrast of band highlight on hovering
• Bug fixes
  • [Invisible Limiter Windows VST] Decibel display of input gain gets corrupted partially
  • [tranQuilizr AAX] Plugin crashes randomly

Version 1.6.0 (2013-09-27)

• New feature
  • AAX Native is now supported.

Version 1.5.4 (2013-09-16)

• Bug fix
  • [Windows VST plugins] plugin’s and host’s windows flicker when plugin’s window is closed twice.

Version 1.5.3 (2013-08-28)

• New features
  • [all VST plugins] soft-bypass (effSetBypass VST call) is now supported.
• Bug fixes
  • [tranQuilizr] plugin crashes when analyzers is activated before its first playback.
  • [tranQuilizr] controls doesn’t follow user preset loading.
  • [tranQuilizr] equalizer curve doesn’t follow A/B toggle.
  • [OSX AudioUnit 32bit plugins] plugin occasionally crashes for tab key input.
  • [OSX AudioUnit 32bit plugins] blank window in several hosts.
  • [all VST plugins] plugin tells a wrong version number to host.

Version 1.5.2 (2013-06-30)

• New features and improvements
  • tranQuilizr is now 2.3 times faster.
  • Freqency analyzers (pre/post) and input peak meter are implemented in tranQuilizr.
• Bug fixes
  • Possible crashing bug of Stereo Image D on Mac 32 bit platform.
  • Input value handling bug of Wave Shredder’s RATE REDUCE text input.
  • Display on/off threshold bug of tranQuilizr’s button controls.
  • Wrong plug-in latency report of Stereo Imager D in bypass state

Version 1.5.1 (2013-05-13)

• All plug-ins:
  • Bugfix: failing to load in Mac OS X 10.6 and 10.7
• Windows VST 64bit plug-ins:
  • Bugfix: wrong addressing mode display
• tranQuilizr:
  • Bugfix: CPU spike
  • Performance improvement at 10-15%

Version 1.5.0 (2013-04-28)

• New plug-in:
  • tranQuilizr
• New features:
  • All plug-ins support direct value input from keyboard.
  • Invisible Limiter supports 0.01dB step for controls.
  • Invisible Limiter supports plug-in latency control. (it was once removed in 1.4.0.).

Version 1.4.2 (2013-01-26)

• New features
  • A/B comparison feature is enabled on all plug-ins.
  • Unity Gain Monitoring feature has been added to Invisible Limiter.
• Bug fix
  • Stereo Imager D: wrong angle bug on phase display.

Version 1.4.1 (2012-11-27)

• Bug fixes
  • Invisible Limiter doesn’t pass AudioUnit validation in Logic Pro 9.
  • Windows VST plug-ins crush on the computer that the License Manager has never invoked in.

Version 1.4.0 (2012-11-21)

• New features
  • Windows VST 64-bit version is available on all plug-ins.
  • Mac OSX VST 32-/64-bit version is available on all plug-ins.
  • Mac OSX Audio Unit 64-bit version is available on all plug-ins.
  • New license management using key files.
• Changes
  • Invisible Limiter: Latency setting is dropped. Plug-in works in low-latency mode at any time.
  • Stereo Imager D: Phase monitor is slightly changed.

Version 1.3.1 (2011-05-30)

• New features
  • Supported AudioUnit format on Mac OS X.
• Bug fixes
  • Crush when plug-in window is rapidly switched.
  • GUI doesn’t follow parameter change from automation.

Version 1.3.0 (2011-05-04)

• New Plug-ins
  • Stereo Imager D
  • Wave Shredder
• Changes
  • All plug-ins are now paid software.

Invisible Limiter (freeware version) (2010-09-09)

• released.